Printer Specifications
Basic specifications
Printing method On-demand ink jet
Nozzle configuration 180 nozzles for each color
Print direction Bidirectional printing
Highest resolution 1440 x 720 dpi
Paper feed method Friction feed
Interface Universal Serial Bus Specifications Revision 2.0
c
Important:
Use this printer at an altitude of up to 6500 feet (2000 m).
Electrical Specifications
Rated voltage AC 100 to 120 V AC 220 to 240 V
Rated frequency range 50/60 Hz 50/60 Hz
Rated current 3.0 A 1.5 A
Power consumption Operating: Approximately 140 W
When standing by: Approximately 60 W
Sleep mode: Approximately 6 W
Power off: Less than 0.5 W
Operating: Approximately 140 W
When standing by: Approximately 60 W
Sleep mode: Approximately 6 W
Power off: Less than 0.5 W
Paper Feeder Specifications
Paper core size
Roll paper feeder (3-inch core diameter): Outer diameter less than 6.7 inches (170 mm)
Paper length
2 to 39.3 inches (50 to 1000 mm)
Paper width
3.5 inches (89 mm), 4 inches (102 mm), 5 inches (127 mm), 6 inches (152 mm), 8 inches (203 mm),
8.3 inches (210 mm)
Ink Specifications
Type Ink cartridges
Ink type
Six-color water-based dye
Use by date Three years after manufacture
Storage temperature
In the packaging: -4 to 104˚F (-20 to 40˚C) (within one month at 104˚F (40˚C)
Installed in printer: -4 to 104˚F (-20 to 40˚C) (within one month at 104˚F (40˚C)
Transport: -5 to 140˚F (-20 to 60˚C ) (within one month at 104˚F (40˚C), 72 hours at 140˚F (-60˚C)
Capacity
200 mL
Appendix
103
To Next Page
Loading...
Need help?
General