Notes on Installation
Warning
Do not block the printer's airflow vents.
If the airflow vents are blocked, the internal temperature rises and could cause a fire.
Do not cover with a cloth or other materials and do not install in an area with poor ventilation. Make sure
to leave enough space around the printer. See the Start Here sheet for more information.
See “Necessary space” on page 105
Caution
Do not install or store the printer in a location that is unstable or subject to vibrations from other
equipment. If the printer falls, an injury could occur.
Do not install the printer in smoky or dusty locations, humid locations, or locations where it is likely to
get wet; Electric shock or fire could occur.
When lifting the printer, make sure you use correct lifting posture. If you do not use
correct posture, an injury could occur.
If you place the printer on a stand with casters (wheels), make sure you secure the casters to prevent them from
moving before starting operations.
If the stand moves unexpectedly during operations, an injury could occur.
Notes on Handling
Warning
Do not use in locations with volatile substances such as alcohol and thinner, or in locations with fires.
Electric shock or fire could occur.
Do not use the printer if you notice smoke, strange odors, or sounds.
Electric shock or fire could occur.
If an abnormality occurs, turn off the printer immediately, unplug it from the electrical outlet, and contact your
local dealer.
Do not use this printer if foreign materials, water, or other liquids have entered the printer.
Electric shock or fire could occur.
Turn off the printer immediately, unplug it from the electrical outlet, and contact your local dealer.
Before Use
15
To Next Page
Loading...
Need help?
General