Epson U220B - TM Two-color Dot-matrix Printer Technical Reference Guide

Rev. D Notices for Replacement of the TM-U210/TM-U300 6-3
TM-U220 Technical Reference Guide
6.1.2 Cutting Method
The TM-U220 (Type A, B) can perform autocutting with partial cut or full cut. However, the
partial cut method is a little different from the TM-U210. The TM-U210 always uses the partial
cut method. The partial cut method is one point left uncut at the center position, so the method is
different from that of the TM-U220 in respect to the uncut position. The TM-U220 leaves the
right position uncut in the partial cut.
Print start position line
Manual cut position line
22.1 mm
Paper feed direction
TM-U210 (Type A, B, D)
TM-U220 (Type A, B)
Print start position line
Auto cut position line
Manual cut position line
27 mm
34.9 mm
Paper feed direction
Print start position line
Manual cut position line
22.1 mm
Paper feed direction
These values are reference values
(When using 76mm roll paper)
TM-U220 (Type D)
(When using 76mm roll paper)

Epson U220B - TM Two-color Dot-matrix Printer Specifications

General

Brand	Epson
Model	U220B - TM Two-color Dot-matrix Printer
Category	Printer
Language	English