Rev. D
How to Install the Printer on a Wall with the WH-10
B-1
TM-U220 Technical Reference Guide
Appendix B
How to Install the Printer on a Wall with the WH-10
WH-10 is a option for the TM printer series, with it you can install a TM-U220 on a wall. This
section describes how to install wall hanging TM-U220. See the “WH-10 installation Manual“ for
details.
Note:
The printer has a “right side up printing“ mode for the printer installed on a wall. See “What is “Right
side up printing“ ?” on page 5-10.
B.1 The Procedure
B.1.1 Precautions
❏ Static electricity may cause cut paper to adhere to the printer case.
(This static electricity will not affect the operation of the printer.)
To Next Page
Loading...
Need help?
General