Epson U220B - TM Two-color Dot-matrix Printer Technical Reference Guide

6-10 Notices for Replacement of the TM-U210/TM-U300 Rev. D
6.2.1.3 Cutting position from print start position
The TM-U220 has almost the same distance from the auto cut position to the print start position
as the TM-U300. Therefore the top margin is same as previous one when you replace the
TM-U300 with the TM-U220 with an autocutter. In other cases, please refer the table and figures
below.
Cutting position TM-U300 (Type A,B, C, D) TM-U220 (Type A,B, D)
A/C position to print start position 36mm 27mm
Manual cut position to print start
position
26mm (type A, B)
28mm (type C, D)
Type D: 22.1mm
TypeA,B: 34.9mm
TM-U220 (Type A, B)
TM-U300 (Type A, B, C, D)
Print start position line
Auto cut position line
Manual cut position line
26 mm (Type A, B)
36 mm
Paper feed direction
28 mm (Type C, D)
These values are reference value
(When using 76mm roll paper)
TM-U220 (Type D)
(When using 76mm roll paper)
Print start position line
Auto cut position line
Manual cut position line
27 mm
34.9 mm
Paper feed direction
Print start position line
Manual cut position line
22.1 mm
Paper feed direction

Epson U220B - TM Two-color Dot-matrix Printer Specifications

General

Brand	Epson
Model	U220B - TM Two-color Dot-matrix Printer
Category	Printer
Language	English