18
1
Please Note:
When the bobbin winder spindle is in
"bobbin winding" position, the machine
will not sew and the hand wheel will
not turn. To start sewing, push the
bobbin winder spindle to the left
(sewing position).
a. Spool pin felt
Press the foot control gently. The bobbin will stop winding when it is full. Push the bobbin to
the left to "sewing position" and remove it.
Place an empty bobbin on the
bobbin winder spindle.
Take the thread from the spool
through the bobbin winder
tension disc. (1)
Wind the thread a few times by
hand around the empty bobbin in
a clockwise direction. Push the
bobbin to the right towards the
bobbin winding position. (2)
2
To Next Page
Loading...
Need help?
General
