GB
Zippers and piping
54
1
2
Set the machine as illustrated. Dial selector on "A".
Set stitch length control between "1" - "4" (according to thickness of
fabric).
The zipper foot can be inserted right or left, depending on which
side of the foot you are going to sew. (1)
To sew past the zipper pull, lower the needle into the fabric, raise
the presser foot and push the zipper pull behind the presser foot.
Lower the foot and continue to sew.
It is also possible to sew in a length of cord, into a bias strip to form
a 'welt'. (2)
0
1
2
3
4
S
1~4
0
5
0
1
2
3
4
A
To Next Page
Loading...
Need help?
General
