GB
86
Patch work
These stitches are used to join two pieces of fabric while leaving a
space between their edges.
1. Fold over the edges of the two pieces of fabric for the hem and
baste the edges to a thin piece of paper leaving a small space
between them.
2. Set the Pattern selector on "I".
Turn the stitch length dial to "S".
3. Stitch along the edge, pulling both threads slightly when begin-
ning to sew.
* Use thicker than normal threads for sewing.
4. After sewing, remove the basting and the paper. Finish by tying
knots on the reverse side at the beginning and the end of the
seams.
0
1
2
3
4
S
S
3~5
5
0
1
2
3
4
I
To Next Page
Loading...
Need help?
General
