EVS XT-3 Technical Reference Hardware Manual

Issue
10.05.D
XT3 Series DISK RECORDER – Version 10.05 - Hardware Technical Reference
EVS Broadcast Equipment SA – July 2011
32
# Connectors Description
6. Multiviewer
Allows a monitor to be connected directly to the EVS
server, and to display PGM and REC
channels as
configured in the Multicam setup.
For more information, refer to the Multicam Setup
user manual.
7. Loop IN Allows the loop of PGM1 on REC1 to be able to use
the loop feature.
8. RS422 ports Allow the EVS server
to be remotely controlled
through Remote panels or third-party control devices.
In a Spotbox mode, in combination with the use of
the Remote Panel, the
Remote Panel should be
connected on the first RS422 port.
9. Timecode Allows the EVS server to receive or send back the
LTC timecode reference signal.
10. Gigabit Ethernet Allow the interconnection of EVS servers, other EVS
and/or third-party systems
into a Gigabit Ethernet
network.
11. RS232 Allows a tablet to be connected to the EVS server.
12. Multi Provides a Multiviewer output in DB15, that can be
configured in CVBS, RGB HD or YUV HD.
13. GPI Allow GPI (General Purpose Interface) devices to
send or receive electric pulses that will trigger
commands on the server or connected third-party
devices.
14. Console Allows a monitor and keyboard to be connected to
the EVS server.
15. Power Supply Two hot-swappable power supply units.
Both are connected to allow
automatic power
switching to the second power supply should the first
one fail.
16. Audio Monitoring
Outputs
AES XLR connectors for audio output for monitoring
purposes.
17. SAS-HDX Allows connection to the external disk array SAS-
HDX.
18. PC LAN XLR connector that enables the connection to the PC
LAN network.

EVS XT-3 Specifications

General

Brand	EVS
Model	XT-3
Category	Server
Language	English