GB-17GB-16
B. Loading the Salt Into the Softener
Always use the salt intended for use with
dishwasher.
e salt container is located beneath the lower
basket and should be lled as explained in the
following:
Attention!
• Only use salt specically designed for the
use in dishwashers! Every other type of salt
not specically designed for the use in a
dishwasher, especially table salt, will damage
the water softener. In case of damages caused
by the use of unsuitable salt the manufacturer
does not give any warranty nor is liable for any
damages caused.
• Only ll with salt just before starting one of
the complete washing programs. is will
prevent any grains of salt or salty water, which
may have been spilled, remaining on the
bottom of the machine for any period of time,
which may cause corrosion.
Open
A. After the lower basket has been removed,
unscrew and remove the cap from the salt
container. (1)
B. Place the end of the funnel (supplied) into
the hole and introduce about 1.5kg of
dishwasher salt.
C. Full ll the salt container with water, it is
normal for a small amount of water to come
out of the salt container. (2)
D. After lling the container, screw the cap
tightly back clockwise.
E. e salt warning light will stop being after
the salt container has been lled with salt.
F. Immediately after lling the salt into the
salt container, a washing program should be
started (We suggest to use a short program).
Otherwise the lter system, pump or
other important parts of the machine may
be damaged by salty water. is is out of
warranty.
To Next Page
Loading...
Need help?
General
