EasyManua.ls Logo

FAR LV12C47MI17IX - Water Outlet Management and Checks

FAR LV12C47MI17IX
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISHENGLISH
GB-53GB-52
Water Outlet
Connect the water drain hose. e drain hose
must be correctly tted to avoid water leaks.
Ensure that the water drain hose is not kinked or
squashed.
Extension Hose
If you need a drain hose extension, make sure to
use a similar drain hose.
It must be no longer than 4 metres; otherwise
the cleaning eect of the dishwasher could be
reduced.
Syphon Connection
e waste connection must be at a height less
than 1000 mm (maximum) from the bottom of
the dish. e water drain hose should be xed.
Start of Dishwasher
e following things should be checked before
starting the dishwasher.
1. e dishwasher is level and xed properly
2. e inlet valve is open
3. Fill hose connections are fully tightened and
not leaking
4. e wires are tightly connected
5. e power is switched on
6. e inlet and drain hoses are knotted
7. All packing materials and printings should
be taken out from the dishwasher
Attention:
After installation, please make sure to keep
this manual. e content of this manual is very
helpful to the users.

Table of Contents

Related product manuals