Fav 900
Engine / Lubrication
Removing and refitting oil cooler
G
Repair
Fav 900 chassis number 23/3001and up
14.02.2001
2312 000002
G
a
1/2
Capitel Docu-No.
Index
Date Version
Page
Removing and refitting oil cooler
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Removing oil filter
Note:
Used oils and filter cartridges are hazardous
waste! Dispose properly!
Remove oil filter.
Unsrew drain plug (arrowed) from oil filter head
and drain fluid into a container of adequate size.
PMTAB_Picture
Disconnect oil pressure sensor.
Remove screws from oil filter head.
Remove gasket residue from the sealing surfaces.
PMTAB_Picture
Remove screws from oil cooler.
Check oil cooler for damage; if necessary,
replace.
Remove gasket residue from the sealing surfaces.
To Next Page
Loading...
General