Fav 900
Engine / Injection Pump
Fuel Injection Pump VP 44 - Mounting - Dismounting
G
Repair
Fav 900 Chassis number 23/3001 and up
01/2000
2710 000002
G
b
2/10
Capitel Docu-No.
Index
Date Version
Page
Fuel Injection Pump VP 44 - Mounting - Dismounting
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Important:
1. Cylinder will be in TDP Position, if the flat
section of the control shaft appears in the TDP
hole.
If the flat section does not appear on the
control shaft, rotate the engine for another
360° into TDP positon.
Valves of cylinder 6 (Flywheel side ) are in
central positon.
PMTAB_Picture
Remove cover
PMTAB_Picture
Important:
Do
not loosen first visible screw M8 (TDP
screw)
PMTAB_Picture
Rotate crank shaft in order to enable loosening of
visible screws 2,3 and 4. (Necessary for the
slantcut injection pump drive pinion)
To Next Page
Loading...
General