Firefly FFC-20 User Manual

Timer is effective either on the day or on every day, where the default is the latter. If you want to set only Timer
on the day is effective, please modify the [No.1] parameter in the table on page 36 through wired controller .
The default mode is timer recurrence. Please refer to following steps to set one-day timer:
Initial state
Long press(≥6 seconds)
Parameter No.
[
]
Please correspond to the serial
number in the table on page 34
Value
Press to turn to parameter No.1
Press to select the value
Step 2
Step 3
Step 1
Adjust the value
Flash
Step 4
Confirm
Flash
Step 5
State of running
State of standby
State of running
State of standby
Press or
7.6 Timer mode setting:
1 represent on every day is effective
No.1 The incoming electric memorized sign
0 represent on the day is effective
Hot Water Series
27

Firefly FFC-20 Specifications

General

Brand	Firefly
Model	FFC-20
Category	Heat Pump
Language	English