–30–
FIRE ALARM SYSTEM (Continued)
Manually Initiating
a Fire Alarm
1. Should you become aware of a fire emergency before your detectors sense the
problem, go to your nearest Keypad and manually initiate an alarm by pressing the
appropriate panic key(s), assigned for FIRE emergency (if programmed by the
installer). Check below, and on page 23.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify your local Fire De-
partment immediately.
4. If no flames or smoke are apparent, investigate the cause of the alarm. The zone
number(s) of the zone(s) in an alarm condition will be displayed at the Keypad.
Ask your installer which lettered key, or key pair, has been assigned for manually initiating a
FIRE alarm, and place a check mark in the box next to the assigned key or key pair.
CHECK LETTERED KEY
[
ASSIGNED FOR FIRE
[
CHECK KEY PAIR ASSIGNED FOR FIRE
A OR PRESS 1 and
✱ AT THE SAME TIME
B OR PRESS ✱ and #
AT THE SAME TIME
\X( ) C \X( ) OR \X( ) PRESS \X( 3 ) and \X(
# ) AT THE SAME TIME
Press and hold the lettered key assigned for Fire emergency
for 2 seconds
.
If the keypad does not have individual lettered keys,
Press the key pair assigned for Fire emergency.
To Next Page
Loading...
Need help?
General
