Fitbit Zip aria User Manual

Select a name for your scale and enter the initials you want the scale to display when it recognizes
you.
5.
Connect to your Wi-Fi network. The setup software may detect your current network. If the software
does not detect your Wi-Fi network, it will show all visible networks in range. Select your network
from the given list. If your network is password-protected, enter your password in the box to the
right. If your network is hidden, select "Add a network."
The password may automatically be supplied by Apple Inc.’s keychain.
6.
Place your scale into setup mode by pulling on the small tab located on the bottom of your scale by
the battery compartment. The scale's display will read "SETUP ACTIVE." If you already pulled the
tab and the screen does not show "SETUP ACTIVE," remove one battery, wait ten seconds,
replace the battery and close the battery compartment.
7.
Fitbit Aria Product Manual http://www.fitbit.com/manual/aria#section-AriaProductManual-GettingSt...
3 of 26 3/20/2013 2:35 PM

Fitbit Zip aria Specifications

General

Brand	Fitbit Zip
Model	aria
Category	Scales
Language	English