Wear and care tips
l Clean your band and wrist regularly with a soap-free cleanser.
l If your tracker gets wet, remove and dry it completely after your activity.
l Take your tracker off from time to time.
For more information, visit the Fitbit Wear & Care page.
Change the band
Inspire 3 comes with a small band attached and an additional large, bottom band in
the box. Boththe top and bottom bands can be swapped with accessory bands,
sold separately on fitbit.com. For band measurements, see "Band size" on page51.
The Fitbit Inspire 2 bands and clip accessory are not compatible with Inspire 3.
Remove a band
1. Turn over Inspire 3 and find the quick-release lever.
2. While pressing the quick-release lever inward, gently pull the band away from
the tracker to release it.
3. Repeat on the other side.
Attach a band
1. To attach a band, hold the band and slide the pin (the side opposite the quick-
release lever) into the notch on the tracker.
2. While pressing the quick-release lever inward, slide the other end of the band
into place.
13
To Next Page
Loading...
Need help?
General
