EasyManuals Logo
Home>FLIR>Thermal cameras>K1

FLIR K1 User Manual

FLIR K1
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Maintenance
8
8.1 Cleaning
Wipe the housing with a damp cloth as needed. Do not use abrasives or sol-
vents. Clean the lenses with a high-quality lens cleaner.
8.2 Battery Service
The rechargeable lithium battery is not user-serviceable. Please contact FLIR
support for service instructions: https://support.flir.com.
If the K1 is not to be used for an extended period (> 3 months), it should be
charged to 70% then stored at room temperature and recharged every 6
months. Failure to do so may result in a battery that cannot be recharged and
therefore will require service.
If the K1 has not been used for an extended period, and the battery has com-
pletely drained, it will require a three-hour safety charge to reach a baseline
where regular charging can then begin.
8.3 Disposal of Electronic Waste
This equipment must be disposed of in an environmentally friendly way, and
in accordance with existing regulations for electronic waste. Please contact
your FLIR Systems representative for additional information.
8.4 Reset the K1
If the K1 display freezes, press and hold the up and down buttons for at least
10 seconds. Release the buttons when the K1 switches off. Restart the K1 to
continue use. No data will be lost by resetting the K1. If problems persist, con-
tact FLIR for support.
#NAS100007; r. AA/59809/59809; en-US
19

Other manuals for FLIR K1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR K1 and is the answer not in the manual?

FLIR K1 Specifications

General IconGeneral
BrandFLIR
ModelK1
CategoryThermal cameras
LanguageEnglish

Related product manuals