Quick Start Guide
5
5.1 Procedure
Follow this procedure:
1. Charge the FLIR ONE camera for approximately 1 hour.
2. Download and install the FLIR ONE app on your phone. The app is available on the
Apple App Store and Google Play Store.
3. Push the On/off button on the bottom of the FLIR ONE camera to turn it on. The indi-
cator will flash green when the FLIR ONE camera is ready.
4. Connect the FLIR ONE camera to your phone. If needed, adjust the blue dial of the
OneFit and extend the connector to the appropriate length to fit your phone’s protec-
tive case.
5. Start the FLIR ONE app on your phone. You will be asked to create a user account
with your e-mail address and a password.
6. At the bottom of the screen and on the black bar, swipe to select Photo mode.
7. At the bottom of the screen, tap the round white button to take a snapshot. The image
is saved to the Gallery.
8. The camera automatically goes into sleep mode after 2 minutes of inactivity.
9. Push and hold the On/off button for more than 2 seconds to turn off the FLIR ONE
camera.
#T810375; r. AA/51295/51295; en-US
7
To Next Page
Loading...
Need help?
General
