Operation
7
7.18.2 Photos
Turn this on to save a copy of your images and videos in the photo gallery of the phone.
Images will always be stored in the FLIR ONE camera regardless of this setting. Items al-
ready captured will not be copied.
7.18.3 Automatic Calibration
Use this setting to turn off (or turn on) automatic calibration and switch to manual calibra-
tion instead.
7.18.4 Temperature Unit
Use this setting to change the unit of the temperature scale between Celsius and the
Fahrenheit.
7.18.5 Emissivity
When the Spot Meter is enabled, the temperature displayed is affected by many factors,
including a property of the target material known as emissivity. This property is a relative
rating of how well a material emits or radiates thermal energy. Some materials are more
emissive than others: glossy or reflective materials such as metals tend to be poor emit-
ters. For most materials, the default “matte” setting is a fair approximation.
7.19 Help
More information about the FLIR ONE camera is available through the Help section and
the Tips and Tricks content in the FLIR ONE app.
7.20 About
The About menu option provides information about the FLIR ONE camera, the FLIR
ONE app, our company FLIR Systems, Inc., and additional legal, licensing, and regula-
tory information.
#T810375; r. AA/51295/51295; en-US
15
To Next Page
Loading...
Need help?
General
