143
[AS22450(MBC )05/95]
❑
Using the “AMS” function to manually tune
your radio
[AS22650(MBC )03/95]
You can change the frequency up or down
one increment at a time by first pressing the
“AMS” button, (display shows “TUNE”) then
pressing and releasing either the right
a
or
left
b
side of the “SEEK” button. To change
frequencies quickly, press and hold down
either the right or left side of the “SEEK”
button.
*
[AS22700(MBC )10/95]
Manual tuning adjusts your radio to any
allowable broadcast frequency, whether or
not a station is present on that frequency.
(See All About Radio Frequencies in this
section.)
*
[AS22800(MBC )10/95]
❑
Using the “SEEK” function
*
[AS22900(MBC )09/95]
This feature on your radio allows you to
automatically select listenable stations up or
down the frequency band. Press the right
(
a
) side of the “SEEK” button to select the
next listenable station up the frequency band.
Press the left (
b
) side of the button to select
the next listenable station down the
frequency band. By holding the button down,
listenable stations can be passed over to reach
the desired station.
*
[AS23150(MBC )01/95]
❑
Using the “SCAN” function
*
[AS23175(MBC )06/95]
Press the “SCAN” button to enter the scan
mode. The radio will begin scanning up the
frequency band, stopping on each listenable
station for approximately a five-second
sampling. This continues until you press the
“SCAN” button a second time. The display
flashes “AM” or “FM.”
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996
To Next Page
Loading...
Need help?
General
