291
[SV46710(M )05/95]
quarter page art:0011232-B
Headlamp access covers
[SV46875(M )08/93]
3. Lift the cover and find the bulb in the
headlamp socket.
[SV47125(M )06/93]
4. Remove the electrical connector from the
bulb by lifting the connector clip upward
while pulling the connector rearward.
[SV47250(M )08/93]
5. Remove the retaining ring by turning
counterclockwise 1/8 of a turn to free it
from the socket. Then slide the ring off the
plastic base. Keep the ring. You must use it
again to hold the new bulb in place.
[SV47300(M )11/92]
6. Carefully remove the bulb assembly from its
socket by gently pulling it rearward without
turning.
File:15rcsvm.ex
Update:Thu Mar 28 14:48:54 1996
To Next Page
Loading...
Need help?
General
