183
%
*
[DR06700(M )03/95]
Shifting the Gears
[DR06800(M )03/95]
The gearshift can be in one of seven possible
positions, as shown below.
[DR06950(M )03/95]
one third page art:0010574-B
The positions of the floor-mounted gearshift
[DR07000(M )03/95]
Always push the clutch pedal all the way in
when you shift. You should upshift according to
the speeds given in the chart in this section.
%
*
[DR07100(M )03/95]
Backing up
*
[DR07200(M )03/95]
To shift into R (Reverse):
*
[DR07300(M )05/95]
1. Bring your vehicle to a complete stop.
[DR07400(M )03/95]
2. Push the clutch pedal in all the way to the
floor.
[DR07550(M )03/95]
3. Then move the gearshift all the way to the
right and pull it back into R (Reverse).
[DR07800(M )03/95]
4. Once R (Reverse) is engaged, slowly release
the clutch pedal from the floor.
[DR07900(M )03/95]
If R (Reverse) is not engaged, continue to push
the clutch pedal in while you put the gearshift
back into Neutral. Then, release the clutch pedal
for a moment and repeat steps 2 through 4.
File:10rcdrm.ex
Update:Wed Mar 27 09:33:56 1996
To Next Page
Loading...
Need help?
General
