14
%
*
[SR04685( ALL)08/95]
Automatic locking mode
*
[SR04686( ALL)03/95]
In this operating mode, the shoulder belt
retractor will be automatically locked and remain
locked when the combination lap/shoulder
safety belt is buckled, and does not allow the
occupant freedom of movement. This mode
provides the following:
*
[SR04687( ALL)08/95]
❑
A tight lap/shoulder belt fit on the occupant.
*
[SR04688( ALL)08/95]
❑
Child seat or infant carrier installation
restraint.
*
[SR04689( ALL)09/95]
RWARNING
Never install a rear-facing child seat or
infant carrier in the right front passenger
seat.
*
[SR04690( ALL)09/95]
This mode must be used when installing a child
safety seat on the front passenger seat and rear
outboard seats where dual locking retractors are
provided.
*
[SR04691( ALL)08/95]
To switch the retractor from the emergency
locking mode to the automatic locking mode,
perform the following steps:
*
[SR04692( ALL)08/95]
1. Buckle the lap/shoulder combination belt.
*
[SR04693( ALL)09/95]
2. Grasp the shoulder portion of the belt and
pull downward until all of the belt is
extracted and, when allowed to retract, a
clicking sound is heard. At this time, the belt
retractor is in the automatic locking mode
(child restraint mode).
*
[SR04694( ALL)10/95]
3. A clicking sound will continue to be heard
as the belt is allowed to retract.
File:03rcsrm.ex
Update:Wed Mar 27 09:23:48 1996