ParkP
ReverseR
NeutralN
DriveD
Sport mode and manual shiftingS
WARNING
Apply the brakes before moving the
selector lever and keep them
applied until you are ready to move
off.
Note:
A cold engine has a higher idle
speed. This will increase the tendency for
your vehicle to creep when you have
selected a drive gear.
Press the button on the selector lever to
select reverse and park.
The selector lever position will be shown
in the information display.
Park
WARNINGS
Select park only when your vehicle
is stationary.
Apply the parking brake and
select park before leaving
your vehicle. Make sure that the
selector lever is latched in position.
Note:
An audible warning will sound if you
open the driver's door and you have not
selected park.
In this position, power is not transmitted
to the drive wheels and the transmission
is locked. You can start the engine with
the selector lever in this position.
Reverse
WARNING
Select reverse only when your
vehicle is stationary and the engine
is at idle speed.
142
Transmission