Ford 2011 C-Max User Manual

PRINCIPLE OF OPERATION
WARNING
When you are going downhill, your
speed may increase above the set
speed. The system will not apply the
brakes but a warning will be given.
The system allows you to set a speed, to
which the vehicle then becomes limited.
The set speed will become the effective
maximum speed of the vehicle, but with
the option to temporarily exceed this limit
if required.
USING THE SPEED LIMITER
Note: The set speed limit can be
intentionally exceeded for a short period
if required, for example when overtaking.
The system is operated by adjustment
controls mounted on the steering wheel.
E133198
A
B
C
D
Set speed increaseA
Speed limiter on/offB
Set speed decreaseC
Speed limiter cancel/resumeD
Switching the system on and
off
Press switch B. The information display
will prompt for a speed to be set.
Setting the speed limit
Use the cruise control switches to alter
the maximum speed setting.
Press switch A or switch C to select your
desired speed limit. The speed is
displayed in the information display and
stored as the set speed.
Press switch D to cancel the limiter and
place it in standby mode. The information
display will confirm deactivation by
showing the set speed crossed out.
Press switch D again to resume the
limiter. The information display will confirm
the system is active by showing the set
speed again.
Intentionally exceeding the set
speed limit
Depress the accelerator fully to
temporarily deactivate the system. The
system will reactivate once the vehicle
speed drops below the set speed.
System warnings
If the set limit is accidentally exceeded,
for example driving downhill, the
information display will show the set
speed flashing together with an audible
warning chime.
If the set limit is intentionally exceeded the
information display will show the set
speed crossed out.
162
Speed limiter

Ford 2011 C-Max Specifications

General

Brand	Ford
Model	2011 C-Max
Category	Automobile
Language	English