Note:
The system will still function
correctly, but there may be an increased
detection time.
If a low pressure warning message is
displayed in the information display, check
the tyre pressures as soon as possible
and inflate them to the recommended
pressure. See Technical
specifications (page 211).
If this happens frequently, have the cause
determined and rectified as soon as
possible.
System reset
Note:
Do not reset the system when the
vehicle is moving.
Note:
You should reset the system
following any adjustment to the tyre
pressures or any changing of tyres.
Note:
Turn the ignition on.
1. Using the information display control,
navigate to Information > Deflat
detect
2.
Press and hold the OK button until
confirmation appears.
TECHNICAL SPECIFICATIONS
Wheel nut torque
Nm (Ib-ft)Wheel type
130 (96)All
Tyre pressures (cold tyres)
Up to 80 km/h (50 mph)
Full loadNormal load
Tyre sizeVariant
RearFrontRearFront
bar (lbf/
in²)
bar (lbf/
in²)
bar (lbf/
in²)
bar (lbf/
in²)
4.2 (61)4.2 (61)4.2 (61)4.2 (61)T125/80 R 16All
4.2 (61)4.2 (61)4.2 (61)4.2 (61)T125/90 R 16All
211
Wheels and tyres