Ford Endura User Manual

-30-
Capacities and Specications
Fluid Specication Product Rell capacity
Engine oil
WSS-M2C950-A SAE 0W-30
5.65 litres (excl lter)
6.1 litres (incl lter)
Brake uid WSS-M6C65-A2 DOT 4 LV Fill to max mark
Engine coolant*
(cooling system incl.
heating)
WSS-M97B44-D R152C5L 11.5 litres
6-speed PowerShift®
Dual Clutch
Transmission uid
(MPS6)
WSS-M2C936-A 6U7J-M2C936-AA 8.5 litres
A/C refrigerant WSS-M17B21-A R1234yf 510 ± 15 grams
A/C compressor oil WSS-M2C300-A2 155 ml
Fuel Diesel 64.3 litres
*Refer to Engine coolant text for coolant/water ratio.
The specied lubricants referred to in the Fluid Specications Section of this Guide have
been extensively tested and provide adequate lubrication performance for your vehicle.
Ford does not recommend the addition of additives to the specied engine, transmission
or axle lubricants. These are unnecessary and could, under certain conditions, result in
powertrain damage which is not covered by the vehicle’s warranty.

Ford Endura Specifications

General

Brand	Ford
Model	Endura
Category	Engine
Language	English