intended user. The only way to reset this odometer to zero is by
clearing MyKey威. If this odometer is lower than the last time you
checked, then the MyKey威 system has been recently cleared.
• # MyKey(S) Programmed — Indicates how many MyKeys威 are
programmed to the vehicle. Can be used to detect deletion of a
MyKey威.
• # Admin Key(s) Programmed — Indicates how many admin keys are
programmed to the vehicle. Can be used to detect if an additional
spare key has been programmed to the vehicle.
Refer to Message center in the Instrument Cluster chapter for MyKey威
system warnings displays.
Using MyKey威 with remote start systems
MyKey威 is not compatible with non-Ford approved aftermarket remote
start systems. If you choose to install a remote start system please see
your authorized dealer for a Ford approved remote start system.
When using a Ford-approved remote start system, the default settings
will recognize the remote start system as an additional admin key with
its associated privileges. Program the remote start system as a MyKey威
in addition to the key that has already been programmed as a MyKey威.
To program the remote start system as MyKey威, do the following:
1. Enter the vehicle and close all doors.
2. Remote start the vehicle using a remote start fob.
3. Follow the steps in the Create a MyKey威 section.
Note: For all vehicles, the number of MyKeys programmed or keys
programmed that are displayed in the MyKey威 system status will include
the remote start system as an additional key in the total count. See the
Check MyKey威 system status section.
Note: For all vehicles with remote start installed, it is possible to
program all ’real’ keys as MyKeys威, in which case, you will need to use
your remote start system to reset all MyKeys威 as admin keys by doing
the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow the steps in the Clear MyKey威 section.
Locks and Security
115
2012 Fusion Hybrid (hfv)
Owners Guide, 1st Printing
USA (fus)