37
ICM - Power Distribution Box
Generator
This is mounted on a bracket at the front of the engine and is driven from the
crankshaft by a serpentine belt.
The charging rate is adjusted automatically by the built-in regulator to provide
sufficient electric current to keep the battery fully charged under normal operating
conditions.
The generator requires no lubrication or maintenance.
WARNING: IT IS ESSENTIAL THAT THE WIRING CONNECTIONS TO THE
GENERATOR ARE NOT REMOVED WHILE THE ENGINE IS RUNNING, AS
THIS WILL RESULT IN DAMAGE TO THE REGULATOR OR PERSONAL
INJURY.
Fuse Amps Circuits protected
1 10 Ignition Voltage to ICM, Starter Relay and Ignition Coil
2 - Not Used
3 - Not Used
4 - Not Used
5 - Not Used
6 - Not Used
1
Starter Relay
Relay #2
2
34
56
Part of -12A200- Wiring Harness
To Next Page
Loading...
Need help?
General
