Black plate (220,1)
RAS/Super Cab, Doubl e Cab
3. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of removal.
Fuses
Your vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls don't
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that syst em and consult an expert repairer,
we recommend an Authorised Ford
Repairer as soon as possible.
qFuse Replacement
Replacing the fuses on the driver's side
If the electrical system does not work,
first inspect the fuses on the driver's side.
1. Turn off the ignition switch and other
switches.
2. Open the fuse panel cover.
Fuse panel cover
8-34
Maintenance and Care
Owner Maintenance
RANGER_F8M1-10-08I_Edition1 Page220
Friday, September 26 2008 3:7 PM
Form No.F8M1-10-08I
To Next Page
Loading...
Need help?
General
