FS S3200 Series User Manual

Make sure that the relative humidity of installation site is maintained at 10%~90%.
Site Environment:
Make sure that the temperature of installation site is maintained at 0°~50°.
The installation site must be well ventilated. Ensure that there is adequate air flow around the
switch.
Make sure that the switch is level and stable to avoid any hazardous conditions.
Make sure that the rack and working platforms are well earthed.
The installation site must be free from leaking, dripping water or heavy dew.
Keep the installation site dust-free.
Desk Mounting
Mounting the Switch
1. Attach four rubber pads to the bottom of switch.
2. Place the switch on a desk.
Left LED: Link/Act Mode Right LED: PoE Mode
SYS
PWR
PoE
CONSOLE
S3200-8M4GS-U
PoE+
1 2 3 4
5 6 7 8
9
10
11
12
10G
EN
5
Left LED: Link/Act Mode Right LED: PoE Mode
SYS
PWR
POE
CONSOLE
S3200-8M4GS-U
PoE+
1 2
COMBO
65
87
21
43
On=Link Flashing=ACT Green=1000M Yellow=10/100M

FS S3200 Series Specifications

General

Brand	FS
Model	S3200 Series
Category	Switch
Language	English