FS STP Series Technology White Paper

POE+ SERIES SWITCHESTECHNICAL WHITE PAPER
www.fs.com
8
#48PoE_config#VLAN 20
48PoE_config_vlan20#exit
48PoE_config#VLAN 30
48PoE_config_vlan30#exit
48PoE_config#int vlan 20
48PoE_config_v20#ip add 172.16.30.1 255.255.255.0
48PoE_config_v20#int vlan 30
48PoE_config_v30#ip add 192.168.2.1 255.255.255.0
48PoE_config#int gigaEthernet 0/5
48PoE_config_g0/5#switchport mode access
48PoE_config_g0/5#switchport pvid 30
48PoE_config_g0/5#int gigaEthernet 0/6
48PoE_config_g0/6#switchport mode access
48PoE_config_g0/6#switchport pvid 20
2) Turn on the telnet function on the 48PoE switch, and use the default user and password for remote login on the PC side. (Default is on, and
remote login cannot be supported after closing)
48PoE_config#ip telnet enable
3) Add the username and password which need to be authenticated on Tacacs+ server.
Add the key, and the key needs to be consistent with the switch key. Otherwise, the switch will fail to negotiate with the Tacacs server. (The key is
Aa123456)

FS STP Series Specifications

General

Brand	FS
Model	STP Series
Category	Switch
Language	English