Total Copy display area
Displays the total number of copies.
Tray indicators
Indicates the selected tray.
Toner Cartridge
This icon is lit when the toner cartridge needs to be replaced in the
near future, and blinks when it needs to be replaced immediately.
Error
This icon is lit when a tray fails, the toner cartridge runs out of ink, or the
drum cartridge ends its life.
Drum Cartridge
This icon is lit when the drum cartridge needs to be replaced in the near
future, and blinks when it needs to be replaced immediately.
Paper Tray Empty
This icon is lit when a tray runs out of paper.
Paper/Document Jam
This icon is lit when a paper or document jams in the machine.
<Clear All> button
To reset the displayed settings of each
feature to default values or clear the
entered numbers.
<Original Size> button
To specify the scanning size and
orientation for using the document glass.
To switch the number of ID card copy.
<Log In/Out> button
To enter or exit System
Administration mode.
<Data> indicator
Blinks while the machine is sending or receiving
data from a client.
<Power Saver> button
To enter or exit Power Saver
mode to save the electricity.
<Error> indicator
Blinks or lights up when an error occurs.
<Last Original> button
To finish scanning documents.
<C> (Clear) button
To delete one numerical value that you have entered.
<Paper Supply> button
To select a tray to use.
<Size (Press 2sec.)> button
To select the size and orientation
of paper loaded in the selected tray.
Numeric keypad
To enter numbers, such as
the total number of copies.
<Stop> button
To cancel a current job or
errored job.
<Start> button
To start scanning documents or confirm
the value of each setting.
To Next Page
Loading...
Need help?
General
