Copyright 2011 – FUJITSU ISOTEC LIMITED
FP-1000 Installation Guide-2 1.1.0.0
55 of 57
10 Admin Manager
10.1 Overview
Admin Manager is used to specify detailed settings for the printer LAN interface and manage printers.
10.2 Installation
Installation Procedure:
(1) Insert the supplied FP-1000 Setup Disk into the PC’s CD-ROM drive.
A menu window may open automatically after you insert the disk. In this case, click the [Exit] button
to exit the installer.
(2) Click the Windows [Start] button to open the menu and then click [Run].
* On Windows 7 or Vista, click the
Windows logo button in the lower-left corner of the desktop
screen and then click [All Programs] [Accessories] [Run].
In the “Open” field, enter “D:\Data\Utility\LAN\Advanset\Adsetup.exe” or click the [Browse]
button and select “D:\Data\Utility\LAN\Advanset\Adsetup.exe”.
Next, click the [OK] button.
Note 1: In this example, the CD-ROM is drive D:. Change this to match the drive name
on your computer.
(3) The installer starts and displays the AdminManager installation wizard. Follow the displayed
instructions to perform the installation.
To Next Page
Loading...
Need help?
General