4 Maintenance
32
4.2 Platen Roller
Please service the platen roller once a month.
1. Please open the paper cover. (Refer to chapter 1.5)
2. Soak a cotton ball with some alcohol and wipe the platen roller
gently until it is clean. Please use isopropyl alcohol.
3. With a soft cloth completely wipe off the platen roller and only
close the cover when it is completely dry.
4.3 Paper Sensor
Please service the paper sensor once a month.
1. Please open the paper cover. (Refer to chapter 1.5)
2. Please remove the dust particles with a soft nylon brush etc.
Important
The paper sensor is an optical sensor. This lens might scratch if too much
pressure is applied to it when cleaning. As a result the printer might not
detect the paper correctly.
To Next Page
Loading...
Need help?
General
