Operation
Changing the monitor settings
The buttons on the control panel have multiple functions. When the OSD
menu is active, the current meaning of the buttons is shown directly
over the buttons on the edge of the screen.
The display (softkey icon) over the buttons varies depending on the sub-menu chosen.
Key Function
Make image and OSD settings / Advanced configuration / Call up monitor
information
Activate/deactivate E
CO operating mode
Selecting the input signal
Select display mode/colour temperature / Adjust RGB channels
Adjust volume
Adjust brightness/contrast
Monitor: switching on/off
Softkey icon
Function
Selecting the next
menu item (sub-menu)
Selecting the previous menu item (sub-menu)
Opening the selected sub-menu
Going to the next setting
Running a function
Goingtothepr
evious setting
Decreasing t
he set value
Increasing
the set value
Accepting t
he applied settings and returning to the previous menu
Rejecting
the applied settings and returning to the previous menu
Exiting OSD menu
Fujitsu 21
To Next Page
Loading...
Need help?
General