Fujitsu PR-LN4 User Manual

PR-LN4 Software Guide
26 / 34
5.4 PRINT SERVER FUNCTIONS
[General]
Configures general network settings.
Item
Settings details
Factory default Setting
General
Change root
Password
Sets the password for managing the PR-LN4
using an ASCII string (7 characters or less).
This password is used as the authentication
password when configuring settings on the web.
None
Printer Name
Sets the printer name.
(Maximum 31 single-byte characters)
None
[TCP IP]
Configures settings such as the IP address for using the TCP/IP protocol.
Item
Settings details
Factory default Setting
TCP IP
DHCP
Sets the DHCP protocol to enabled (ENABLE) or
disabled (DISABLE).
(*1)
ENABLE
IP Address
Sets the IP address of the PR-LN4 using the
decimal format "xxx.xxx.xxx.xxx".
192.168.1.1
Subnet Mask
Sets the subnet mask of the PR-LN4 using the
decimal format "xxx.xxx.xxx.xxx". "0.0.0.0" is
invalid, and automatically uses the subnet mask
corresponding to the IP address.
255.255.255.0
Default Gateway
Sets the default gateway of the PR-LN4 using
the decimal format "xxx.xxx.xxx.xxx". "0.0.0.0"
is invalid.
0.0.0.0
*1) When DHCP disabled, IP Address is 192.168.192.168.

Fujitsu PR-LN4 Specifications

General

Brand	Fujitsu
Model	PR-LN4
Category	Printer Accessories
Language	English