Fujitsu PRIMERGY TX1330 M2 User Manual

50 Operating Manual TX1330 M2
Hardware installation
5.4 Connecting devices to the server
The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed. For further information refer to the “FUJITSU Server PRIMERGY
TX1330 M2 Upgrade and Maintenance Manual”. The standard connectors are
indicated by symbols and color coding:
Figure 2: Connector panel on the rear side
I Some of the devices that can be connected may require special drivers
(see the documentation for the connected device).
Ê Connect the data cables to the server and peripherals.
1 Management LAN connector, for iRMC S4 server management function
2 Shared LAN connector (LAN1)
3 Standard LAN connector (LAN2)
4 6 USB connectors: 4x USB 2.0 (black); 2x USB3.0 (blue)
5 Video connector (blue)
6 Serial connector COM1 (turquoise)
햶
햷
햵
햲 햴햳

Fujitsu PRIMERGY TX1330 M2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX1330 M2
Category	Server
Language	English