Fujitsu ScanSnap fi-5110C User Manual

CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
2.1 Turning the scanner ON
2.2 Loading Documents on the ADF for
Scanning
2.3 Scanning Documents
2.4 How to Use the Scanner Driver
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
2.4 How to Use the Scanner Driver
1
2 3 4 5 6 7 8 9 10
FUJITSU TWAIN32 Scanner Driver
FUJITSU TWAIN32 Scanner Driver is designed for scanning documents with FUJITSU image scanner fi
series by using application software that complies with the TWAIN standard.
The following describes the procedure with examples of ScandAll 21 for ordinary scanning by using this
driver software.
1. Procedure for Basic Scanning Operation
Startup the application.
From the [Start] menu, select [Programs]-[Scanner Utility for Microsoft Window] and click [ScandAll
21].
Select your scanner on the window below.
Select [Select Source] from the [Scan] menu.
Select [FUJITSU fi-5110Cdj] and then click the [Select] button.
Load the documents on the scanner.
For details on loading documents, refer to "
2.2 Loading Documents on the ADF for Scanning".
Open the TWAIN Driver window.
Select [Scan To View] from the [Scan] menu.
1
2 3 4 5 6 7 8 9 10
CONTENTS

Fujitsu ScanSnap fi-5110C Specifications

General

Brand	Fujitsu
Model	ScanSnap fi-5110C
Category	Scanner
Language	English