6 |
2. Connecting ScanSnap
This chapter describes how to connect ScanSnap to your
PC.
2.1. Installing the Supplied Software
Before connecting the scanner to your computer, please
install the following software on your PC.
c Adobe Acrobat 6.0 (Application)
d ScanSnap Manager (Driver)
e CardMinder (Application)
f PDF Thumbnail View (Application)
TTENTION
• Be sure to install “ScanSnap Manager”
before connecting the scanner to your
PC.
If the scanner is connected before installing
ScanSnap Manager, the “Found New Hardware
Wizard” appears (This screen may differ
depending on the used OS). In this case, click
the [Cancel] button to close the wizard.
• It is not possible to simultaneously connect both
ScanSnap fi-5110EOX and fi-4110EOX series
scanners (or two or more fi-5110EOX
scanners) to one computer.
• If any driver of the ScanSnap fi-4110EOX
series has already been installed on your
computer, uninstall it before starting the
installation.
• In case of ScanSnap fi-4010CU, you can use it
with this scanner without uninstall its driver.
• When using Windows 2000 or Windows XP, log
on as a user with administrator privileges.
• ScanSnap fi-5110EOX is required as follows:
CPU
: Intel
®
Pentium
®
III 600MHz or higher
(recommended: Intel
®
Pentium
®
4
1.8GHz or higher)*
Memory:
128MB or more
(recommended: 256MB or more)*
* If the CPU and the memory do not meet the
recommended requirements or the USB
version is 1.1, the scanning speed will slow
down.
HINT
ScanSnap Manager includes the driver software for
ScanSnap! fi-4110EOX2. You can use this driver
also for ScanSnap! fi-4110EOX2, if you have.
* It is not possible to simultaneously connect
ScanSnap fi-5110EOX and ScanSnap!
fi-4110EOX2 to one personal computer.
2.1.1. Installing Adobe Acrobat 6.0
Please prepare the Adobe Acrobat 6.0 CD-ROM.
TTENTION
Adobe Acrobat 6.0 is not supported by
Windows 98 and Windows Me
1. Insert the “Adobe Acrobat 6.0 CD-ROM” into the
CD-ROM drive.
ÖThe “Adobe Acrobat 6.0 AutoPlay” window appears.
HINT
This window is not displayed automatically
when the "Auto play" setting of your computer is
deactivated. In this case, please run
“AutoPlay.exe” of this CD-ROM directly using
the “Explore” or “My computer”.
2. Select [Install] and click the [Install Acrobat 6.0
Standard] button.
3. Click the [Next>] button.
Ö The installation starts, and the setup window appears.
4. Follow the instructions to install the software.
HINT
Click the [How to install] button on the [Adobe
Acrobat 6.0 AutoPlay] window to learn more
about the Adobe Acrobat 6.0 installation.
Refer to “Adobe Acrobat Help” about how to
use Adobe Acrobat 6.0.
TTENTION
Suppport and User registration for Adobe
products
For details, refer to the technical support
information stored in the [Customer Support]
folder on Adobe Acrobat 6.0 Standard
CD-ROM. (Note that free person-to-person
support is not available for this is bundled
product.)
2.1.2. Installing ScanSnap Manager,
CardMinder and PDF Thumbnail View
Please prepare the ScanSnap Setup CD-ROM.
1. Insert the “ScanSnap Setup CD-ROM” into the
CD-ROM drive.
Ö The “ScanSnap Setup” window appears.