Fujitsu ScanSnap fi-5110EOX Getting Started

ScanSnap fi-5110EOX Getting Started | 9
3. How to Use ScanSnap
This chapter describes basic operation of ScanSnap.
3.1. Scanning Documents
With “ScanSnap” you can turn paper office documents on
your desk into digital files and save them just by pressing a
single button. The scanned image can be viewed on the
screen using the supplied applications (Adobe Acrobat,
CardMinder).
Two typical usages are:
c Create digital backups of general office documents in PDF
format. View or edit them later using “Adobe Acrobat”.
d Scan and manage business cards. With “CardMinder”, scan,
recognize and edit business cards, and export the data to a
popular personal information manager application such as
Outlook.
3.2. About the Scan Settings
You can change ScanSnap settings by using “ScanSnap
Manager”.
1. Right-click the “ScanSnap Manager icon” on the
task tray and select [Setting ...] from the following
menu.
Ö The “Scan and Save Settings” window opens.
2. Change the scan settings on the “Scan and Save
Settings” window.
There are six tabs used to configure the scan options:
[Application]
Select the application for viewing/editing the scanned
images.
[Save]
Specify the folder and file name to save the scanned
images.
[Scanning]
Specify the quality of the scanned image.
[File option]
Select the file format (PDF, JPEG) for saving the scanned
images.
[Paper size]
Select the size of the document to be scanned.
[Compression]
Select the compression rate of a file.
HINT
Refer to the “ScanSnap Operator’s Guide” in
the “ScanSnap Setup CD-ROM” to learn more
about these settings.
3. Click the [OK] button to finish the configuration.
Ö The new settings are enabled.
3.3. Scanning Office Documents
1. Select “Adobe Acrobat” at [Application:] under the
[Application] tab of “Scan and Save Settings”.
2. Load the documents onto the scanner.
3. Press the [SCAN] button.
Ö Scanning starts.
Ö When the scanning is completed, Adobe Acrobat starts
and displays the scanned images.
HINT
● You can also use another application to display
scanned images.
● Pressing [SCAN] button, the documents are
scanned in the “Duplex” mode.
To scan the document in the Simplex” mode,
change this setting using the ScanSnap Manager
.
● The ScanSnap scanner is able to scan
documents using various settings. Refer to the
“ScanSnap Operator’s Guide” on the
“ScanSnap Setup CD-ROM” to learn more
about scanning documents.
S
S
[SCAN] button
Set the paper face-down
on the Paper chute cover.
Set the back side of the
paper to the front.
Scanning
direction

Fujitsu ScanSnap fi-5110EOX Specifications

General

Brand	Fujitsu
Model	ScanSnap fi-5110EOX
Category	Scanner
Language	English