Your Zero Client... English - 5
Your Zero Client...
has a whole range of useful f eatures and functions, e.g.:
• TFT display (Thin Film Transistor; active ma trix)
• minimal space requirement
s because of the slim casing
• LED background lighting
• LAN port 100 MBit Etherne
t
• PoE (Pow er over Ethernet) for Zero Client DZ22-2
• Built-in Zero Client te
chnology for easy access to the Virtual Desktop
• DVI port for second monitor (it is not possible to connect to a PC via this socket)
• 4 USB sockets (for keyb
oard, mou se an d two further USB devices)
• 3.5 mm ja ck sockets for headphones and microphone
• optimum ergonomic ch
aracteristics (totally distortion-free, excellent picture
definition an d colo
ur purity right into the corners)
• high degree of brightness and good contrast
• High resolution -
1280 x 1024 pixels (Zero Client DZ 19-2) or 1680 x
1050 pixels (Zero
Client DZ22-2)
• display of u p to 16.7 million colours
• Automatic scann
ing of horizontal frequencies from 30 to 82 kHz (Zero Client
DZ22-2)or31to
81 kHz (Zero Client DZ19-2) and refresh rates (vertical
frequencies)
from 59 to 76 Hz (totally flicker-free)
• digital screen controller with microprocessor for storing 12 different display modes
• colour adjus
tment for matching the screen image to individual viewing usage
• convenient operation via integrated OSD (On Screen Display) menu
• VESA-DDC co
mpatibility
• VESA-FPMPMI compat ibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting de vice for swivel arm and wall bracket
• Plug & play
capability
• ECO function
• Power man
agement for reducing power consum ption when the Zero Client is inactive
This operating manual contains the important information that you need for the initial
operation and everyday use of your Zero Client.
Zero Client DZ22-2 is capable of being powered over the LAN. If you use
Power over Ethernet (PoE), you need the corresponding network infrastructure
but no additional power source. Note however that you always need a
power so urce to operate Zero Client DZ19-2.
To operate the Zero Client you need a LAN connection to a s erver
with desktop virtualisation software.
The LAN data cable is not included in the delivery. A keyboard and mouse
will also be needed and these can be ordered as options.
Fujitsu Technology Solutions 7
To Next Page
Loading...
Need help?
General