Operation English - 25
Adjusting the brightness and contrast
Call up th e Brightness/Contrast setting window
Brightness
Set the brightness of the display
With this function you can change the brightness of the background lighting.
Contrast
Set the con trast of the display
With this function you ca n modify the c ontrast of pale colours.
Black level
Set the brightness of the display
With this function you modify the contrast of dark colours.
If the contrast is set too high, b right surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightn ess will not be achieved.
Adjusting the volume
Call the Audio setting window
Volume
Set the volume for playback with the integrated loudspeakers
Mute
Switch the loudspeakers off or on
Excessive volume from the headphones can damage your hearing and cause
loss of hearing. If the volume in the audio application is increased above the
mid-position of the control, the voltage at the head phone output is also increased,
which can cause the sound pressure to be too high.
Setting the co
lour temperature and colours
Call the Colour setting window
Select the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The
colour temperature is measured in Kelvin (K). You can choose between
sRGB, 6500 K, 7500 K, 9300 K, Native and Custom Colour.
In the user-defined setting you can change the colour ratios of the basic
colours (red, green, blue) as required.
Fujitsu Technology Solutions 27
To Next Page
Loading...
Need help?
General