4. INSTALLATION
4-19
Captain
Backup
Select whether to include the Captain as a back-up nav-
igation officer. That is, select whether to forward the
alarm to the Cabin Panel in the Captain’s quarters in the
2nd stage or the 3rd stage.OFF: Forward in 3rd
stage.ON: Forward in 2nd stage.
When [Captain Backup] is set to [ON], the captain icon is
underlined.
2nd Stage Select whether to omit 2nd stage alarm or not.OFF: Omit
alarm.ON: Don’t omit alarm.
Backup
Officer
Change the name of navigation officers; add navigation
officers; set the function of the Cabin Panel in the quar-
ters of the Captain.
How to select the function of the Cabin Panel in the
quarters of the Captain:
1) Select [1 CAPTAIN].
2) Press the ENT/CALL key.
3) Select [Backup] or [Captain]. If [Captain] is selected,
a small "C" appears before the first backup officer’s
name in the backup officer list on the BNWAS dis-
play.
4) Press the ENT/CALL key.
How to change the name of navigation officers, add
navigation officers:
1) Select a name. (To add an officer, select a blank
line.)
2) Press the ENT/CALL key to show the spinner box for
setting name.
3) Use the right or left arrow on the CursorPad to set the
cursor on a character.
4) Use the up or down arrow on the CursorPad to select
a character.
Note: You can clear the entire line by long-pushing
the ENT/CALL key.
5) Repeat steps 3 and 4 to change other characters.
6) Finally, press the ENT/CALL key to finish.
2nd Stage
Buzzer
Select the 2nd stage buzzer type. Intermittent1: ON: 200
ms, OFF: 250 ms Intermittent2: ON: 200 ms, OFF: 400
ms
Key Beep Turn the key beep on or off.
Menu Item Description Options
Function of Cabin
Panel in quarters of
Captain
Names of
Navigation Officers
(default)
Intermittent2
Intermittent1
To Next Page
Loading...
Need help?
General
