1-8
2. The last-used menu is displayed. (In Figure 1-6 the COM2 menu is selected.) To select a
different menu, press
to select MENU at the top of the screen and then press or to
select menu desired.
3. Press
or to select menu item desired. At the bottom of the screen menu help is
provided.
4. Press ► to open the corresponding dialog box. The example below shows the dialog box for
DELETING TRACK in the COM2 menu.
DELETING TRACK
NO YES
Figure 1-7 Dialog box for deleting track
5. Press
or to select option desired. If the option requires selection of numeric data, use
or to lower or raise the figure, respectively.
6. Press
or to return to the menu, or press the [MENU] key to register your selection
and close the menu.
To Next Page
Loading...
Need help?
General
