Furuno CH-250 User Manual

5-4
5.3 Short-cut Menu, Preset Menu
These menus program the CUSTOM MODE keys [1], [2] and [3], and one of the menus appears
according to the setting of CUSTOM KEY on the SYSTEM SETTING 1 menu.
Short-cut key: One-touch activation of corresponding dialog box. This is the default setting.
Preset key: One-touch setup of mode, sector, train, range, tilt and speed controls. Below are
the default settings for PRESET.
CUSTOM MODE
key
Display Mode Sector Train Range (m)* Tilt Speed
Key 1 Expanded Horizontal
240° 0°
250
30°
Fast
Key 2 Horizontal 360° 0° 250 30° Fast
Key 3 Vertical Fan 180° 90° 120 90° Fast
* - Default range for 60 kHz transducer. Default range changes with transducer.
5.3.1 Selecting short-cut or preset
1. Press the [MENU] key to open the menu.
2. Press
to select MENU, and then press to select SYS.
NOYES
: SELECT
: CHANGE
MENU: END
GO TO SYS MENU
MENU
COM1 HORZ VERT ES PRESETCOM2
SYS
Figure 5-2 Display for opening system menu
3. Press
to select GO TO SYS MENU.
4. Press
to select YES.

Furuno CH-250 Specifications

General

Brand	Furuno
Model	CH-250
Category	Sonar
Language	English