SP-1 E4417S01G
SPECIFICATIONS OF THE U-AIS TRANSPONDER FA-100
The AIS shall improve the safety of navigation by assisting in the efficient navigation of ship’s,
protection of the environment, and operation of Vessel Traffic Services (VTS), by the functions of
collision avoidance, ships’ and cargo’s information obtaining, and traffic management.
1 GENERAL
1.1 Display Monochrome STN-LCD, 60 (H) x 95 (W) mm, 120 x 64 dots
1.2 TX/RX Frequency 156.025 MHz to 162.025 MHz
1.3 Output Power 2 W/ 12.5 W or 0W exchangeable
1.4 Impedance 50 ohms
1.5 DSC Receiver CH70 fixed, 156.525 MHz, G2B, 1200 bps
1.6 Band Width 25 kHz/ 12.5 kHz
2 TRANSPONDER UNIT
2.1 CPU SH7709A, 76.0 MHz
2.2 ROM Flash ROM 1 MW
2.3 Menu Target data/ Plotter/ Own data/ Set MSG/ Init Settings/
System Settings/ Diagnostics
3 GPS RECEIVER
3.1 Receiving Channels 12 channels parallel, 12 satellites tracking
3.2 Rx Frequency/ Rx Code 1575.42 MHz, C/A code
3.3 Position Fixing System All in view, 8-state Kalman filter
3.4 Position Accuracy Approx. 10 m, 95% of the time, (HDOP 4)
DGPS: approx. less than 5 m, 95% of the time
3.5 Tracking Velocity 900 kts
3.6 Position-fixing Time Warm start: 12 seconds, Cold start: 90 seconds
3.7 Position Update Interval 1 second
3.8 DGPS Data Receiving RTCM SC-104 Ver 2.1 formatted
4 INTERFACES
4.1 Sensor 1/ 2/ 3 IEC 61162-1(2000-07)/61162-2(1998-09)
Input: DTM, GNS, GLL, GGA, RMC, VBW, VTG, OSD, HDT, GBS,
ROT (GN>GP>GL>LC)
4.2 PC I/O, EXTRA1, LR or ECDIS/RADAR
IEC 61162-1(2000-07)/61162-2(1998-09)
Input: VSD, SSD, ABM, BBM, ACA, ACK, AIR, DTM, GBS, GGA, GLL,
GNS, HDT, LRF, LRI, OSD, RMC, ROT, VBW, VTG
Output: VDM, VDO, ABK, ACA, ALR, TXT, LR1, LR2, LR3, LRF, LRI
4.3 Alarm Contact Closure
4.4 LAN (10base-T) IEC61162-4
To Next Page
Loading...
Need help?
General
