EasyManuals Logo

Furuno FE-700 Service Manual

Furuno FE-700
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
9
1.6 DISPLAY
The TFT LCD module is employed for the presentations. The control circuit and fluorescent
lamp for backlighting are molded in the LCD unit "EDTCA14QCF". The life of the fluorescent
lamp is approx. 20,000 hours if it is used with max. brightness.
High voltage for LCD backlighting is generated on the MAIN board and is outputed from J4-#1
and #2 to the LCD unit. Figure 1.9 shows the LCD inverter circuit. The output level between J4-
#1 and #2 is approx. 1.6 to 2.0kVpp when LCD unit is connected.
Waveform between J4-#1 and J4-#2
Figure 1.9 LCD inverter circuit on the MAIN board
1.6 DISPLAY

Other manuals for Furuno FE-700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Furuno FE-700 and is the answer not in the manual?

Furuno FE-700 Specifications

General IconGeneral
Frequency50/200 kHz
Power Supply12-24 VDC
Operating Temperature-15°C to +55°C
Display TypeColor LCD
InterfaceNMEA 0183

Related product manuals