Furuno FELCOM 15 Installation Manual

i
CAUTION
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage. The
voltage rating appears on the label at the
rear of the terminal unit.
Standard
Steering
Antenna Unit IC-115
Terminal Unit IC-215
Printer PP-510
Junction Box IC-315
Distress Alert/
Received Call Unit IC-305
Alarm Unit IC-306
EGC Printer PP-505
AC/DC Power Supply Unit
PR-240
Mini keyboard
SAFETY INSTRUCTIONS
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
should work inside the
equipment.
WARNING
Turn off the power at the
mains switchboard before
beginning the installation.
Post a sign near the switch
to indicate it should not be
turned on while the equip-
ment is being installed.
Fire, electrical shock or
serious injury can result if the
power is left on or is applied
while the eqiuipment is being
installed.
ELECTRICAL
SHOCK
HAZARD
0.30 m 0.30 m
0.70 m 0.40 m
1.00 m 0.80 m
1.00 m 0.70 m
Do not approach the ra-
dome closer than 60 cm
when it is transmitting.
Microwave radiation can
cause severe injury or illness.
Radiation level:
10 W/m at 60 cm
2
Attach securely protection
earth to the ship's body.
The protection earth is required
to the power supply to prevent
electrical shock.
0.30 m 0.30 m
Use the correct fuse.
Use 10 A fuse (defalt setting) for 12 VDC
power supply, or replace the fuse to 5 A
(supplied as spare parts) with 24 VDC.
Use of wrong fuse can result in damage to
the equipment.
Keep the following compass safe
distances.
0.50 m 0.30 m
0.50 m 0.30 m
2.05 m 1.40 m
0.90 m 0.60 m

Furuno FELCOM 15 Specifications

General

Brand	Furuno
Model	FELCOM 15
Category	Marine Radar
Language	English